Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Spanish

Translating step 6

Step 6
Remove the four 3.9 mm T5 Torx screws on both sides, which secure the antenna cable assembly. Also remove the twelve 1.1 mm P2 pentalobe screws on both sides.
  • Remove the four 3.9 mm T5 Torx screws on both sides, which secure the antenna cable assembly.

  • Also remove the twelve 1.1 mm P2 pentalobe screws on both sides.

Remueve los cuatro tornillos T5 Torx en ambos lados que sujetan el ensamblaje de cable de antena.

También remueve los doce tornillos P2 de 1.1 mm en ambos lados.

[* red] Remove the four 3.9 mm T5 Torx screws on both sides, which secure the antenna cable assembly.
[* orange] Also remove the twelve 1.1 mm P2 pentalobe screws on both sides.
[* orange] Also remove the twelve 1.1 mm P2 pentalobe screws on both sides.

Your contributions are licensed under the open source Creative Commons license.