Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Italian

Translating step 1

Step 1
Remove the four 1.9 mm T3 Torx screws securing the plastic covers on top of the display hinges. Remove both plastic hinge covers. Remove both plastic hinge covers.
  • Remove the four 1.9 mm T3 Torx screws securing the plastic covers on top of the display hinges.

  • Remove both plastic hinge covers.

Rimuovi le quattro viti Torx T3 da 1,9 mm che fissano le cover di plastica disposte sopra alle cerniere del display.

Usando delle pinzette, rimuovi le due cover di plastica negli angoli sinistro e destro del MacBook.

[* red] Remove the four 1.9 mm T3 Torx screws securing the plastic covers on top of the display hinges.
[* black] Remove the twoboth plastic covers in the left and right corner of the Macbook with a pair of tweezershinge covers.
[* black] Remove the twoboth plastic covers in the left and right corner of the Macbook with a pair of tweezershinge covers.

Your contributions are licensed under the open source Creative Commons license.