Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Spanish

Translating step 1

Step 1
Remove the four 1.9 mm T3 Torx screws securing the plastic covers on top of the display hinges. Remove both plastic hinge covers. Remove both plastic hinge covers.
  • Remove the four 1.9 mm T3 Torx screws securing the plastic covers on top of the display hinges.

  • Remove both plastic hinge covers.

Remueve los cuatro tornillos de 1.9 mm T3 Torx que sujetan las tapas de plástico en la parte superior de las bisagras de la pantalla.

Remueve las dos tapas de plástico de la esquina izquierda y la derecha del MacBook con un par de pinzas.

[* red] Remove the four 1.9 mm T3 Torx screws securing the plastic covers on top of the display hinges.
[* black] Remove the twoboth plastic covers in the left and right corner of the Macbook with a pair of tweezershinge covers.
[* black] Remove the twoboth plastic covers in the left and right corner of the Macbook with a pair of tweezershinge covers.

Your contributions are licensed under the open source Creative Commons license.