Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.

English
Dutch

Translating step 2

Step 2
Press a suction handle into place near the front edge of the lower case, between the screw holes. Lift up on the suction handle just enough to open a small gap under the lower case.
  • Press a suction handle into place near the front edge of the lower case, between the screw holes.

  • Lift up on the suction handle just enough to open a small gap under the lower case.

Druk een zuignap op de onderste behuizing, zo dicht mogelijk bij de voorkant van de laptop en precies tussen de schroefgaten.

Til de zuignap lichtjes omhoog zodat je een kleine opening onder de behuizing creëert.

Your contributions are licensed under the open source Creative Commons license.