Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Italian

Translating step 2

Step 2
Gently peel back the small piece of tape covering the battery board data cable connector. The tape is integrated into the ribbon cable and will not detach completely. Simply peel it back enough to access the connector.
  • Gently peel back the small piece of tape covering the battery board data cable connector.

  • The tape is integrated into the ribbon cable and will not detach completely. Simply peel it back enough to access the connector.

Stacca delicatamente il piccolo pezzo di nastro adesivo che copre il connettore del cavo dati della scheda batteria.

Questo nastro adesivo è integrato nel cavo a nastro e non si staccherà del tutto. Sollevalo, tirandolo indietro, giusto quanto basta per poter accedere al connettore.

Your contributions are licensed under the open source Creative Commons license.