Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Italian

Translating step 1

Step 1
Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery. Remove the tape.
Uncover the battery connector
  • Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery.

  • Remove the tape.

Stacca con cautela l'ampio pezzo di nastro adesivo che copre il connettore della batteria, sul bordo della scheda logica più vicino alla batteria stessa.

Rimuovi il nastro adesivo.

[title] Uncover the battery connector
[* black] Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery.
[* black] Remove the tape.

Your contributions are licensed under the open source Creative Commons license.