Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 10

Step 10
Peel off the remaining film liners to expose the adhesive before pressing your new battery into place. Carefully position the battery and press it firmly and evenly into the phone. Connect the battery to the motherboard, and install the lower cover, including its six T3 Torx screws.
  • Peel off the remaining film liners to expose the adhesive before pressing your new battery into place.

  • Carefully position the battery and press it firmly and evenly into the phone.

  • Connect the battery to the motherboard, and install the lower cover, including its six T3 Torx screws.

Stacca le pellicole di rivestimento per esporre l'adesivo prima di premere in posizione la batteria.

Posiziona con cura la batteria e premila decisamente e in modo uniforme nel telefono.

Collega la batteria alla scheda madre e installa il coperchio inferiore, comprese le sei viti Torx T3.

Your contributions are licensed under the open source Creative Commons license.