Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Spanish

Translating step 10

Step 10
Peel off the remaining film liners to expose the adhesive before pressing your new battery into place. Carefully position the battery and press it firmly and evenly into the phone. Connect the battery to the motherboard, and install the lower cover, including its six T3 Torx screws.
  • Peel off the remaining film liners to expose the adhesive before pressing your new battery into place.

  • Carefully position the battery and press it firmly and evenly into the phone.

  • Connect the battery to the motherboard, and install the lower cover, including its six T3 Torx screws.

Despega los revestimientos de film para exponer el adhesivo antes de presionar la nueva batería para colocarla en su lugar.

Con cuidado posiciona la batería y presiónala de forma pareja en el teléfono.

Conecta la batería a la placa madre e instala la tapa inferior, incluyendo su seis tornillos T3 Torx.

Your contributions are licensed under the open source Creative Commons license.