Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 10

Step 10
Peel off the remaining film liners to expose the adhesive before pressing your new battery into place. Carefully position the battery and press it firmly and evenly into the phone. Connect the battery to the motherboard, and install the lower cover, including its six T3 Torx screws.
  • Peel off the remaining film liners to expose the adhesive before pressing your new battery into place.

  • Carefully position the battery and press it firmly and evenly into the phone.

  • Connect the battery to the motherboard, and install the lower cover, including its six T3 Torx screws.

Ziehe alle Schutzfolien vom Klebebeand ab, damit die Klebeflächen frei werden, bevor du den Akku festdrückst.

Richte den Akku sorgfältig aus und drücke ihn gleichmäßig fest.

Verbinde den Akku mit der Hauptplatine und setze die untere Abdeckung wieder ein. Schraube die sechs Torx T3 Schrauben fest.

Your contributions are licensed under the open source Creative Commons license.