Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
German

Translating step 2

Step 2
Use an opening pick at the top edge to get between the NFC antenna and charging coil assembly and the case. Lever the top of the assembly out of the case.
  • Use an opening pick at the top edge to get between the NFC antenna and charging coil assembly and the case.

  • Lever the top of the assembly out of the case.

Setze ein Plektrum an der oberen Kante ein, um zwischen die Einheit aus NFC-Antenne und Ladespule und das Gehäuse zu gelangen.

Heble die obere Kante der Einheit aus dem Gehäuse heraus.

Your contributions are licensed under the open source Creative Commons license.