Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
French

Translating step 2

Step 2
Using the flat end of a spudger, pry the front-facing camera connector off of its socket on the headphone jack assembly. Slide the spudger to the right, releasing the adhesive holding down the camera cable. Slide the spudger to the right, releasing the adhesive holding down the camera cable.
  • Using the flat end of a spudger, pry the front-facing camera connector off of its socket on the headphone jack assembly.

  • Slide the spudger to the right, releasing the adhesive holding down the camera cable.

À l'aide de l'extrémité plate d'un spudger, retirez le connecteur de caméra frontale de sa prise sur l'ensemble prise casque.

Faites glisser le spudger vers la droite, en faisant céder l'adhésif qui colle la nappe de la caméra.

Your contributions are licensed under the open source Creative Commons license.