Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Japanese

Translating step 3

Step 3
Use the flat end of a spudger to pry the left speaker cable connector up and out of its socket on the I/O board.
  • Use the flat end of a spudger to pry the left speaker cable connector up and out of its socket on the I/O board.

  • Pry up from beneath the wires.

スパッジャーの平面側先端を使って、I/Oボード上のソケットから左側スピーカーケーブルコネクタを持ち上げて外します。

ワイヤーの下から持ち上げてください。

Your contributions are licensed under the open source Creative Commons license.