Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
German

Translating step 3

Step 3
Use the flat end of a spudger to pry the left speaker cable connector up and out of its socket on the I/O board.
  • Use the flat end of a spudger to pry the left speaker cable connector up and out of its socket on the I/O board.

  • Pry up from beneath the wires.

Hebele den Stecker am Kabel zum linken Lautsprecher mit dem flachen Ende des Spudgers hoch und aus seinem Anschluss auf dem I/O Board heraus.

Hebele unter den Drähten.

Your contributions are licensed under the open source Creative Commons license.