Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 7

Step 7
Remove the front camera and sensor cable assembly. A piece of black double-sided insulating tape lies between the display and three rows of copper contacts on the back of the camera/sensor cable. It may remain stuck to the display, or it may come off with the cable. When reassembling, verify the tape is in place, or else cover the contacts on the back of the cable with an appropriate tape, such as Kapton tape.
  • Remove the front camera and sensor cable assembly.

  • A piece of black double-sided insulating tape lies between the display and three rows of copper contacts on the back of the camera/sensor cable. It may remain stuck to the display, or it may come off with the cable.

  • When reassembling, verify the tape is in place, or else cover the contacts on the back of the cable with an appropriate tape, such as Kapton tape.

フロントカメラとセンサケーブルアセンブリを取り出します。

ディスプレイとカメラ/センサーケーブル背面に付いている3列の銅接点の間に黒い両面絶縁テープがあります。 ディスプレイに付着したままか、ケーブルと一緒に外れることがあります。

再組立の際には、テープが所定の位置に付いているか確認、もしくはカプトンテープなどの適切なテープを使ってケーブル背面の接合部分を覆ってください。

Your contributions are licensed under the open source Creative Commons license.