Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 7

Step 7
Remove the front camera and sensor cable assembly. A piece of black double-sided insulating tape lies between the display and three rows of copper contacts on the back of the camera/sensor cable. It may remain stuck to the display, or it may come off with the cable. When reassembling, verify the tape is in place, or else cover the contacts on the back of the cable with an appropriate tape, such as Kapton tape.
  • Remove the front camera and sensor cable assembly.

  • A piece of black double-sided insulating tape lies between the display and three rows of copper contacts on the back of the camera/sensor cable. It may remain stuck to the display, or it may come off with the cable.

  • When reassembling, verify the tape is in place, or else cover the contacts on the back of the cable with an appropriate tape, such as Kapton tape.

Rimuovi il gruppo fotocamera frontale e sensore cavi.

Tra il display e le 3 file di contatti di rame sul retro del cavo fotocamera/sensori c'è un pezzo di nastro biadesivo nero isolante. Può rimanere incollato al display o staccarsi insieme al cavo.

In fase di rimontaggio, verifica che il nastro sia al suo posto. In caso contrario copri i contatti sul retro del cavo con un pezzo di nastro adeguato, come il Kapton.

Your contributions are licensed under the open source Creative Commons license.