Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Spanish

Translating step 7

Step 7
Remove the front camera and sensor cable assembly. A piece of black double-sided insulating tape lies between the display and three rows of copper contacts on the back of the camera/sensor cable. It may remain stuck to the display, or it may come off with the cable. When reassembling, verify the tape is in place, or else cover the contacts on the back of the cable with an appropriate tape, such as Kapton tape.
  • Remove the front camera and sensor cable assembly.

  • A piece of black double-sided insulating tape lies between the display and three rows of copper contacts on the back of the camera/sensor cable. It may remain stuck to the display, or it may come off with the cable.

  • When reassembling, verify the tape is in place, or else cover the contacts on the back of the cable with an appropriate tape, such as Kapton tape.

Remueve el ensamblaje de cable de sensor y cámara frontal.

Una pieza de cinta aislante negra de doble lado se encuentra entre la pantalla y las tres hileras de contactos de bronce en la parte trasera del cable de sensor/cámara. Podría quedarse atascada a la pantalla o podría salir con el cable.

Al volver a ensamblar, verifica que la cinta esté en su lugar o sino cubre los contactos en la parte posterior del cable con cinta apropiada, como cinta Kapton.

Your contributions are licensed under the open source Creative Commons license.