Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 5

Step 5
Insert the sharp edge of an iFixit opening tool underneath the camera assembly's flex cable, on the opposite side from the front-facing camera. Use an iOpener or hair dryer as needed to heat the top portion of the display and soften the adhesive securing the flex cable. Pry up to separate the edge of the flex cable from the back of the display.
  • Insert the sharp edge of an iFixit opening tool underneath the camera assembly's flex cable, on the opposite side from the front-facing camera.

  • Use an iOpener or hair dryer as needed to heat the top portion of the display and soften the adhesive securing the flex cable.

  • Pry up to separate the edge of the flex cable from the back of the display.

iFixit特製開口ツールをフロントカメラの反対側に搭載されたカメラアセンブリ用フレックスケーブルの下に先端を差し込みます。

iOpener、ヘアドライヤーを必要に応じて使い、ディスプレイの上部に熱を当てて、フレックスケーブルを固定している接着剤を柔らかくします。

ディスプレイ裏側からフレックスケーブルの端を剥がします。

Your contributions are licensed under the open source Creative Commons license.