Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 5

Step 5
Insert the sharp edge of an iFixit opening tool underneath the camera assembly's flex cable, on the opposite side from the front-facing camera. Use an iOpener or hair dryer as needed to heat the top portion of the display and soften the adhesive securing the flex cable. Pry up to separate the edge of the flex cable from the back of the display.
  • Insert the sharp edge of an iFixit opening tool underneath the camera assembly's flex cable, on the opposite side from the front-facing camera.

  • Use an iOpener or hair dryer as needed to heat the top portion of the display and soften the adhesive securing the flex cable.

  • Pry up to separate the edge of the flex cable from the back of the display.

Inserisci il bordo affilato di uno strumento di apertura iFixit sotto il cavo flessibile del gruppo fotocamera, dal lato opposto alla fotocamera frontale.

Se necessario usa un iOpener o un asciugacapelli per riscaldare la parte superiore del display e ammorbidire l'adesivo che tiene in posizione il cavo flessibile.

Fai leva per separare il bordo del cavo flessibile dal retro dello schermo.

Your contributions are licensed under the open source Creative Commons license.