Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 2

Step 2
Use a hairdryer or heat gun or prepare an iOpener and apply it to the top front of the display for about a minute, in order to soften the adhesive securing the sensors.
  • Use a hairdryer or heat gun or prepare an iOpener and apply it to the top front of the display for about a minute, in order to soften the adhesive securing the sensors.

  • The sensors in the following steps are fragile. To increase your chances of removing them without damage, repeatedly add more heat as needed. Alternatively, add a drop or two of isopropyl alcohol and let it penetrate under the sensors before you pry them up.

Usa un asciugacapelli, una pistola o prepara un iOpener e applicalo al bordo superiore del pannello frontale del display per circa un minuto al fine di ammorbidire l'adesivo che fissa i sensori.

I sensori dei passi seguenti sono fragili. Per aumentare la probabilità di rimuoverli senza fare danni, applica calore più volte se necessario. Oppure applica una o due gocce di alcol isopropilico che lascerai penetrare sotto i sensori prima di staccarli.

Your contributions are licensed under the open source Creative Commons license.