Skip to main content
English
Spanish

Translating step 1

Step 1
Remove the three Phillips screws securing the speaker: Two 1.4 mm screws One 2.4 mm screw
  • Remove the three Phillips screws securing the speaker:

  • Two 1.4 mm screws

  • One 2.4 mm screw

  • During reassembly, press the speaker toward the bottom edge of the iPhone until the screw holes align, and hold it there while you install the screws.

Remueve los tres tornillos Phillips que sujetan el altavoz:

Dos tornillos de 1.4 mm

Uno de 2.4 mm

Durante el re-ensamblaje, presiona el altavoz hacia el borde inferior del iPhone hasta que los orificios del tornillo estén alineados y sujétalo mientras instalas los tornillos.

Your contributions are licensed under the open source Creative Commons license.