Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
German

Translating step 3

Step 3
Peel back the digitizer ribbon cable and use the flat end of a spudger to release the adhesive securing the cable to the rear aluminum case. Peel back the digitizer ribbon cable and use the flat end of a spudger to release the adhesive securing the cable to the rear aluminum case.
  • Peel back the digitizer ribbon cable and use the flat end of a spudger to release the adhesive securing the cable to the rear aluminum case.

Löse das Digitizer Flachbandkabel ab und lockere den Kleber, mit dem das Kabel am hinteren Aluminiumgehäuse festgemacht ist, mit dem flachen Ende eines Spudgers.

Your contributions are licensed under the open source Creative Commons license.