Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
German

Translating step 1

Step 1
If necessary, peel back the piece of tape that secures the digitizer ribbon cable to the logic board. Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors. Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors.
  • If necessary, peel back the piece of tape that secures the digitizer ribbon cable to the logic board.

  • Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors.

Falls notwendig, löse das Stück Tape, dass das Digitizer FIachbandkabel am Logic Board befestigt.

Klappe die Haltelasche an beidne ZIF Steckern des Digitizer Flachbandkabels um.

Your contributions are licensed under the open source Creative Commons license.