Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.


Translating step 6

Step 6
Remove the battery from the iPhone.
Remove the battery
  • Remove the battery from the iPhone.

  • If your replacement battery came in a plastic sleeve, slide off and remove the sleeve before installation.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

  • Perform a force restart after reassembly. This can prevent several issues and simplify troubleshooting.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.




新しいバッテリーに接着剤があらかじめ付いていない場合は、 このガイド を参考にして、接着ストリップを交換してください。

再組み立ての後、 強制的に再起動してください。これにより、いくつかの問題を防ぎ、トラブルシューティングを容易にすることができます。



Your contributions are licensed under the open source Creative Commons license.