Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Spanish

Translating step 4

Step 4
Slide the pick down the bottom edge of the phone. Go slowly so that the tip doesn't slip out of the seam. If sliding becomes difficult, reheat and reapply the iOpener. Leave the pick in place to prevent the adhesive from resealing, and grab another pick as you proceed to the next step.
  • Slide the pick down the bottom edge of the phone.

  • Go slowly so that the tip doesn't slip out of the seam. If sliding becomes difficult, reheat and reapply the iOpener.

  • Leave the pick in place to prevent the adhesive from resealing, and grab another pick as you proceed to the next step.

Desliza la selección hacia abajo el borde inferior del teléfono.

Ve despacio para que la punta no se salga de la costura. Si el deslizamiento se vuelve difícil, recalienta y vuelve a aplicar el iOpener.

Deja la selección en su lugar para evitar que el adhesivo vuelva a sellarse, y toma otra selección a medida que avanzas al siguiente paso.

Your contributions are licensed under the open source Creative Commons license.