Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

English
German

Translating step 5

Step 5
If the EMI shield has any sharp protrusions after removal, you should flatten them before reinstalling the shield. Squeeze the sharp protrusion with a pair of pliers to flatten it. Repeat the process for all sharp protrusions along the edges of the EMI shield.
  • If the EMI shield has any sharp protrusions after removal, you should flatten them before reinstalling the shield.

  • Squeeze the sharp protrusion with a pair of pliers to flatten it.

  • Repeat the process for all sharp protrusions along the edges of the EMI shield.

Wenn nach dem Entfernen aus der EMI Abschirmung einige scharf Stellen herausragen, solltest du sie vor dem Zusammenbau erst wieder flach biegen.

Drücke die scharfen Stellen mit einer Zange wieder flach.

Wiederhole das Ganze für alle scharfen Stellen an den Kanten der EMI Abschirmung.

Your contributions are licensed under the open source Creative Commons license.