Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

English
German

Translating step 16

Step 16
Slide the opposite opening pick down to the bottom right corner of the iPad. If necessary, reheat the adhesive on the right edge to loosen the display assembly. If necessary, reheat the adhesive on the right edge to loosen the display assembly.
  • Slide the opposite opening pick down to the bottom right corner of the iPad.

  • If necessary, reheat the adhesive on the right edge to loosen the display assembly.

Schiebe das rechte Plektrum bis zur unteren rechten Ecke des iPads nach unten.

Wenn nötig, musst du die rechte Kante wieder erwärmen, damit sich die Displayeinheit löst.

Your contributions are licensed under the open source Creative Commons license.