Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 32 guides that include this step.

English
English

Translating step 1

Step 1
Remove the following 12 screws securing the front bezel to the rear case:
  • Remove the following 12 screws securing the front bezel to the rear case:

  • Eight 13 mm T8 Torx.

  • Four 25 mm T8 Torx.

  • On the 24" iMac Intel Model A1225, the bottom center two screws are long (26mm), four on sides (two left, two right) are medium (18mm), and the remaining 6 (four top, two bottom corners) are short (14mm).

Remove the following 12 screws securing the front bezel to the rear case:

Eight 13 mm T8 Torx.

Four 25 mm T8 Torx.

On the 24" iMac Intel Model A1225, the bottom center two screws are long (26mm), four on sides (two left, two right) are medium (18mm), and the remaining 6 (four top, two bottom corners) are short (14mm).

Your contributions are licensed under the open source Creative Commons license.