Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

English
English

Translating step 1

Step 1
Remove the two 5.3 mm T6 torx screws from the LCD connector. Firmly grasp the pull tab on top of the connector and pull it straight up out of its port. Make sure that you are pulling the tab and not the connector cable.
  • Remove the two 5.3 mm T6 torx screws from the LCD connector.

  • Firmly grasp the pull tab on top of the connector and pull it straight up out of its port.

  • Make sure that you are pulling the tab and not the connector cable.

Remove the two 5.3 mm T6 torx screws from the LCD connector.

Firmly grasp the pull tab on top of the connector and pull it straight up out of its port.

Make sure that you are pulling the tab and not the connector cable.

Your contributions are licensed under the open source Creative Commons license.