Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
German

Translating step 11

Step 11
Disconnect the following connectors from the logic board:
  • Disconnect the following connectors from the logic board:

  • Hard drive thermal sensor cable.

  • CPU fan cable.

  • When removing these connectors, it is helpful to push the ears on either side of the connector with your fingernails or the tip of a spudger toward the top edge of the iMac.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.