Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

English
Spanish

Translating step 2

Step 2
Remove the front-facing camera and rear microphone assembly. If you are installing a new part, your new part may have two tabs with holes in it used for manufacturing purposes. These tabs can be cut off with scissors.
  • Remove the front-facing camera and rear microphone assembly.

  • If you are installing a new part, your new part may have two tabs with holes in it used for manufacturing purposes. These tabs can be cut off with scissors.

  • There is a small, square plastic and metal holder for the proximity sensor. This holder is essential for the proximity sensor to function correctly.

  • If replacing the proximity sensor or camera make sure that the holder remains adhered to the back of the display. If it comes off with the old proximity sensor, remove it from the old sensor and use a tiny bit of adhesive to re-attach it to the back of the display.

Saca el ensamblaje de la camara frontal y del microfono trasero.

Si estás instalando una nueva parte, tu nueva parte puede tener dos etiquetas con agujeros utilizados para propósitos de fabricación. Estas etiquetas pueden ser cortadas con tijeras.

Hay un recipiente cuadrado y pequeño de plástico y metal para el sensor de proximidad. Este recipiente es importante para que el sensor de proximidad funcione correctamente.

Si estás reemplazando el sensor de proximidad o la cámara, asegúrate de que el recipiente se mantenga pegado a la parte trasera de la pantalla. Si se despega con el sensor de proximad antiguo, quitalo del sensor antiguo y utiliza un poco de adhesivo para reacomodarlo a la parte trasera de la pantalla.

Your contributions are licensed under the open source Creative Commons license.