Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 22 guides that include this step.

English
Spanish

Translating step 7

Step 7
Make sure the suction cup is firmly attached to the front panel assembly.
Start lifting the front panel assembly
  • Make sure the suction cup is firmly attached to the front panel assembly.

  • While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.

  • Take your time and apply firm, constant force. The screen is a much tighter fit than most devices.

  • With a plastic opening tool, begin to gently pry the rear case down, away from the screen, while you pull up with the suction cup.

  • There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

Asegúrate que la ventosa esté presionada firmemente contra el ensamblaje del panel frontal.

Mientras sostienes el iPhone con una mano, jala la ventosa hacia arriba para separar el ensamblaje del panel frontal un poco de la caja trasera.

Tómate tu tiempo y aplica fuerza firme y constante. La pantalla es un encaje más apretado que otros dispositivos.

Utilizando una herramienta de apertura de plastico, empieza a cuidadosamente separar la caja trasera de la pantalla, mientras continuando jalando hacia arriba con la ventosa.

Hay varios clips deteniendo el ensamblaje del panel frontal a la caja trasera, así que tendrás que utilizar una combinación de la ventosa y herramienta de apertura de plástico para liberar el ensamblaje del panel frontal.

Your contributions are licensed under the open source Creative Commons license.