Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 22 guides that include this step.

English
Spanish

Translating step 10

Step 10
Remove the following two screws securing the metal battery connector bracket to the logic board:
Removing the battery connector bracket screws
  • Remove the following two screws securing the metal battery connector bracket to the logic board:

  • One 1.8 mm Phillips screw

  • One 1.6 mm Phillips screw

Quita los siguente tornillos asegurando el soporte del conector de batería a la placa lógica:

Un tornillo Phillips de 1.8 mm

Un tornillo Phillips de 1.6 mm

Your contributions are licensed under the open source Creative Commons license.