Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
Dutch

Translating step 1

Step 1
Remove the two 5 mm T6 Torx screws securing the display data cable connector to the logic board. Pull the display data cable connector up off the logic board by its black pull tab.
  • Remove the two 5 mm T6 Torx screws securing the display data cable connector to the logic board.

  • Pull the display data cable connector up off the logic board by its black pull tab.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.