Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
Italian

Translating step 1

Step 1
Remove the two 5 mm T6 Torx screws securing the display data cable connector to the logic board. Pull the display data cable connector up off the logic board by its black pull tab.
  • Remove the two 5 mm T6 Torx screws securing the display data cable connector to the logic board.

  • Pull the display data cable connector up off the logic board by its black pull tab.

Rimuovere le due viti Torx T6 da 5 mm che fissano il connettore del cavo dati del display alla scheda logica.

Estrarre il connettore del cavo dati del display dalla scheda logica tramite la linguetta d'estrazione nera.

Your contributions are licensed under the open source Creative Commons license.