French
English

Oukitel K10000 MAX Teardown

Guide Information

= Done = Incomplete

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief 1-2 sentence summary will appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1

      Unscrew 8 side screws (flat 2.4mm or dedicated torx), then of the 4 rear screws (hex 1.5mm).

      Step 2

      Remove the front of the phone, disconnecting the LED connector.

      Step 3

      Remove the 5 screws (Phillips #0) on the black support.

      Step 4

      remove the 3 screws (Phillips #0) supporting the PCB.

      Step 5

      Your contributions are licensed under the open source Creative Commons license.