Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Chinese

Translating step 2

Step 2
Line up the small SATA connectors so that the narrow side of the connector on the SSD matches the narrow side on the enclosure connector. Slide the drive in through the front of the enclosure until the SATA connector is fully seated. The SSD connects  with the enclosure in only one way. If the connectors are not lining up, rotate the SSD and try again.
  • Line up the small SATA connectors so that the narrow side of the connector on the SSD matches the narrow side on the enclosure connector.

  • Slide the drive in through the front of the enclosure until the SATA connector is fully seated.

  • The SSD connects with the enclosure in only one way. If the connectors are not lining up, rotate the SSD and try again.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.