Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 153 guides that include this step.

Back to Guide
English
Japanese
Previous step Next step

Translating step 19

Step 19
Continue releasing the adhesive along the top edge of the iPad, and slide the opening pick around the top left corner. If the adhesive is warm enough, remove the iOpener from the iPad for convenience. However, if the adhesive is still quite sticky, re-heat the iOpener and lay it on the left edge while you work.

  • Continue releasing the adhesive along the top edge of the iPad, and slide the opening pick around the top left corner.

  • If the adhesive is warm enough, remove the iOpener from the iPad for convenience. However, if the adhesive is still quite sticky, re-heat the iOpener and lay it on the left edge while you work.

iPad上端に沿って接着剤を引き続き切開し、左上角周辺を開口ピックでスライドします。

接着剤が十分に温まっている場合、iOpenerをiPadから外してください。 接着剤に粘着性が残っている場合、iOpenerを再加熱してデバイス左端に載せます。

Your contributions are licensed under the open source Creative Commons license.