Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 153 guides that include this step.

English
Spanish

Translating step 19

Step 19
Continue releasing the adhesive along the top edge of the iPad, and slide the opening pick around the top left corner. If the adhesive is warm enough, remove the iOpener from the iPad for convenience. However, if the adhesive is still quite sticky, re-heat the iOpener and lay it on the left edge while you work.
  • Continue releasing the adhesive along the top edge of the iPad, and slide the opening pick around the top left corner.

  • If the adhesive is warm enough, remove the iOpener from the iPad for convenience. However, if the adhesive is still quite sticky, re-heat the iOpener and lay it on the left edge while you work.

Continúe soltando el adhesivo a lo largo del borde superior del iPad, y deslice la selección de apertura alrededor de la esquina superior izquierda.

Si el adhesivo está lo suficientemente caliente, retire el iOpener del iPad para mayor comodidad. Sin embargo, si el adhesivo sigue siendo bastante pegajoso, vuelva a calentar el iOpener y colóquelo en el borde izquierdo mientras trabaja.

Your contributions are licensed under the open source Creative Commons license.