Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

English
Italian

Translating step 6

Step 6
Angle the Lightning connector assembly and pull it out of its recess. Remove the four metal washers and set them aside for reassembly. Before reassembly, use the opening tool or the flat end of a spudger to remove all adhesive residue from the rear case. You can use high-concentration isopropyl alcohol to help with the stubborn spots.
  • Angle the Lightning connector assembly and pull it out of its recess.

  • Remove the four metal washers and set them aside for reassembly.

  • Before reassembly, use the opening tool or the flat end of a spudger to remove all adhesive residue from the rear case. You can use high-concentration isopropyl alcohol to help with the stubborn spots.

Insert translation here

Insert translation here

Insert translation here

[* black] Angle the Lightning connector assembly and pull it out of its recess.
[* red] Remove the four metal washers and set them aside for reassembly.
[* icon_reminder] Before reassembly, use the opening tool or the flat end of a spudger to remove all adhesive residue from the rear case. You can use high-concentration isopropyl alcohol to help with the stubborn spots.

Your contributions are licensed under the open source Creative Commons license.