Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

English
Spanish

Translating step 6

Step 6
Angle the Lightning connector assembly and pull it out of its recess. Remove the four metal washers and set them aside for reassembly. Before reassembly, use the opening tool or the flat end of a spudger to remove all adhesive residue from the rear case. You can use high-concentration isopropyl alcohol to help with the stubborn spots.
  • Angle the Lightning connector assembly and pull it out of its recess.

  • Remove the four metal washers and set them aside for reassembly.

  • Before reassembly, use the opening tool or the flat end of a spudger to remove all adhesive residue from the rear case. You can use high-concentration isopropyl alcohol to help with the stubborn spots.

Inclina el ensamblaje del conector Lightning y sácalo de su hueco.

Remueve las cuatro arandelas de metal y apártalas para cuando vuelvas a ensamblar.

Antes de volver a ensamblar, usa la herramienta de apertura o el extremo plano de un spudger para eliminar todos los residuos de adhesivo de la caja trasera. Puedes usar alcohol isopropílico de alta concentración para ayudar con las manchas rebeldes.

Your contributions are licensed under the open source Creative Commons license.