Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

English
Italian

Translating step 2

Step 2
Remove the following two screws securing the top logic board bracket to the rear case:
  • Remove the following two screws securing the top logic board bracket to the rear case:

  • One 1.5 mm Phillips screw

  • One 2.3 mm Phillips screw

Rimuovi le seguenti due viti che fissano il supporto superiore della scheda logica al case posteriore.

Una vite Philips da 1,5 mm

Una vite Philips da 2,3 mm

Your contributions are licensed under the open source Creative Commons license.