Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

English
German

Translating step 2

Step 2
Remove the following two screws securing the top logic board bracket to the rear case:
  • Remove the following two screws securing the top logic board bracket to the rear case:

  • One 1.5 mm Phillips screw

  • One 2.3 mm Phillips screw

Entferne die folgenden zwei Schrauben, welche den oberen Bügel des Logic Boards befestigen:

Eine 1,5 mm Kreuzschlitzschraube

Eine 2,3 mm Kreuzschlitzschraube

Your contributions are licensed under the open source Creative Commons license.