Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

English
German

Translating step 5

Step 5
Hold onto your iPhone securely and close the handle of the iSclack to separate the suction cups, pulling the front panel up from the rear case. The iSclack is designed to safely open your iPhone just enough to separate the pieces, but not enough to damage any cables.
Finishing the iSclack Opening Procedure
  • Hold onto your iPhone securely and close the handle of the iSclack to separate the suction cups, pulling the front panel up from the rear case.

  • The iSclack is designed to safely open your iPhone just enough to separate the pieces, but not enough to damage any cables.

  • Peel the two suction cups off your iPhone.

  • Skip the next three steps and continue on Step 9.

Umfasse dein iPhone mit festem Griff und schließe den Handgriff deines iSclacks, um die Saugnäpfe voneinander zu trennen und dadurch die Display Einheit vom hinteren Gehäuse zu lösen.

Der iSclack öffnet dein iPhone gerade soweit, dass die Teile voneinander getrennt werden, aber nicht weit genug, um die Kabel zu beschädigen.

Löse die beiden Saugnäpfe von deinem iPhone.

Überspringe die nächsten drei Schritte und fahre mit Schritt 9 fort.

Your contributions are licensed under the open source Creative Commons license.