Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Dutch

Translating step 2

Step 2
In the following steps, you'll be cutting through the adhesive securing the back cover. The adhesive is laid out as seen in the first image, which shows the inside of the cover after it has been removed.
  • In the following steps, you'll be cutting through the adhesive securing the back cover.

  • The adhesive is laid out as seen in the first image, which shows the inside of the cover after it has been removed.

  • As seen from outside the phone, you'll be slicing through the adhesive in the areas shown:

  • Thick portions of adhesive

  • Thin areas of adhesive

  • Avoid prying or slicing in this area, to protect the fingerprint sensor flex cable.

In de volgende stappen zul je door de lijm die de achterste cover vasthoudt heen gaan snijden.

De lijm zit op de plekken die worden aangegeven op de eerste foto, welke de binnenkant van de cover laat zien nadat deze is verwijderd.

Gezien van de buitenkant van de telefoon, zul je door de volgende stukken lijm heen gaan snijden in de gekleurde gebieden:

Dikke lagen lijm

Dunne lagen lijm

Vermijd wrikken of snijden in dit gebied om de flexkabel van de vingerafdruksensor te beschermen.

Your contributions are licensed under the open source Creative Commons license.