Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Italian

Translating step 6

Step 6
Examine the controllers rubber guards to see if it needs to be replaced or simply needs to be readjusted. If it is damaged, replace the rubber guard with a new one for the correct model, then, proceed to the next step. If not, proceed to the next step. Carefully slide the rubber guard with the area that sticks out more going down into the slot (The crater part of the rubber guard should be in place for the R2/L2 slots; see picture for directions). Once in place, ensure it is snugged and secure.
  • Examine the controllers rubber guards to see if it needs to be replaced or simply needs to be readjusted. If it is damaged, replace the rubber guard with a new one for the correct model, then, proceed to the next step. If not, proceed to the next step.

  • Carefully slide the rubber guard with the area that sticks out more going down into the slot (The crater part of the rubber guard should be in place for the R2/L2 slots; see picture for directions). Once in place, ensure it is snugged and secure.

Analizza i gommini del controller per verificare se necessitino di essere sostituiti, oppure semplicemente registrati. Se danneggiati, sostituiscili pure con dei gommini dello stesso modello. Poi procedi col prossimo passo.

Fai scivolare delicatamente i gommini verso l'esterno, tenendoli dalla parte che più esce fuori (la parte convessa del gommino dovrebbe essere quella che va riposizionata sotto i tasti L2/R2; guarda bene l'immagine per capire). Una volta risistemati, assicurati che siano ben saldi.

Your contributions are licensed under the open source Creative Commons license.