Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Italian

Translating step 1

Step 1
Remove the two  rubber feet with arrows by them on the back side to uncover two screws. Unscrew the four silver 4.4mm long screws near the hard drive. Unscrew the remaining nine black 6.5mm long screws. Then remove the back casing using a pry tool if needed.
  • Remove the two rubber feet with arrows by them on the back side to uncover two screws.

  • Unscrew the four silver 4.4mm long screws near the hard drive.

  • Unscrew the remaining nine black 6.5mm long screws. Then remove the back casing using a pry tool if needed.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.