Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 1

Step 1
Remove the two  rubber feet with arrows by them on the back side to uncover two screws. Unscrew the four silver 4.4mm long screws near the hard drive. Unscrew the remaining nine black 6.5mm long screws. Then remove the back casing using a pry tool if needed.
  • Remove the two rubber feet with arrows by them on the back side to uncover two screws.

  • Unscrew the four silver 4.4mm long screws near the hard drive.

  • Unscrew the remaining nine black 6.5mm long screws. Then remove the back casing using a pry tool if needed.

Retirez les deux patins en caoutchouc avec les flèches à l'arrière pour découvrir deux vis.

Dévissez les quatre vis argentées de 4,4 mm de long près du disque dur.

Dévissez les neuf autres vis noires de 6,5 mm de long. Ensuite, retirez le boîtier arrière à l'aide d'un outil levier si nécessaire.

Your contributions are licensed under the open source Creative Commons license.