Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
French

Translating step 1

Step 1
Remove the three 6mm PH2 phillips head screws. Disconnect the ribbon cable by flipping up the latch on the connector and then pull the ribbon out. Disconnect the ribbon cable by flipping up the latch on the connector and then pull the ribbon out.
  • Remove the three 6mm PH2 phillips head screws.

  • Disconnect the ribbon cable by flipping up the latch on the connector and then pull the ribbon out.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.