Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

English
French

Translating step 3

Step 3
Place the spring into the replacement buckle lock. While compressing the spring, slide the buckle lock into the Joy-Con. Keep the spring compressed using the tweezers.  Then use the spudger to push the buckle into the joy con opening.  Do not release the tweezers yet. Use the spudger to hold the buckle and spring in place while you remove the tweezers.  Once the tweezers are removed, you may go ahead and release the spudger from the buckle.
Installing the new buckle lock
  • Place the spring into the replacement buckle lock. While compressing the spring, slide the buckle lock into the Joy-Con.

  • Keep the spring compressed using the tweezers. Then use the spudger to push the buckle into the joy con opening. Do not release the tweezers yet.

  • Use the spudger to hold the buckle and spring in place while you remove the tweezers. Once the tweezers are removed, you may go ahead and release the spudger from the buckle.

  • Replace the metal cover, making sure not to overtighten the screw.

  • Check that the black plastic latch button is still in place. Reassemble the Joy-Con.

Placez le ressort dans le loque de verrouillage de rechange. Tout en comprimant le ressort, faites glisser le loquet de verrouillage dans la Joy-Con.

Maintenez le ressort comprimé à l'aide d'une pincette. Utilisez ensuite la spatule (spudger) pour pousser le loquet dans l'ouverture de la Joy-Con. Ne relâchez pas encore la pincette.

Utilisez la spatule pour maintenir la boucle et le ressort en place pendant que vous enlevez la pince. Une fois celle-ci retirée, vous pouvez continuer et détacher la spatule de la boucle.

Replacez le couvercle métallique, en veillant à ne pas trop serrer la vis.

Vérifiez que le loquet de verrouillage en plastique noir est toujours en place. Remontez la Joy-Con.

Your contributions are licensed under the open source Creative Commons license.