Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

English
French

Translating step 1

Step 1
Remove the 4 screws on the back of the Joy-Con using a Tri-Point Y00 Screwdriver. Carefully separate the two halves of the Joy-Con.  Be gentle—there are ribbon cables connecting them inside. Remove the single #00 Phillips screw holding the black plastic shell in place.
Opening the Joy-Con
  • Remove the 4 screws on the back of the Joy-Con using a Tri-Point Y00 Screwdriver.

  • Carefully separate the two halves of the Joy-Con. Be gentle—there are ribbon cables connecting them inside.

  • Remove the single #00 Phillips screw holding the black plastic shell in place.

Retirez les 4 vis à l'arrière de la Joy-Con en utilisant un tournevis Tri-Point Y00.

Séparez soigneusement les deux parties de la Joy-Con. Faites attention, il y a des nappes qui les relient à l'intérieur.

Retirez la vis #00 cruciforme qui maintient la coque en plastique noir.

Your contributions are licensed under the open source Creative Commons license.